- op_numNumber of grains, should be 2
C++ Type:unsigned int
Controllable:No
Description:Number of grains, should be 2
- var_name_basespecifies the base name of the variables
C++ Type:std::string
Controllable:No
Description:specifies the base name of the variables
- x1The x coordinate of the lower left-hand corner of the box
C++ Type:double
Controllable:No
Description:The x coordinate of the lower left-hand corner of the box
- x2The x coordinate of the upper right-hand corner of the box
C++ Type:double
Controllable:No
Description:The x coordinate of the upper right-hand corner of the box
- y1The y coordinate of the lower left-hand corner of the box
C++ Type:double
Controllable:No
Description:The y coordinate of the lower left-hand corner of the box
- y2The y coordinate of the upper right-hand corner of the box
C++ Type:double
Controllable:No
Description:The y coordinate of the upper right-hand corner of the box
BicrystalBoundingBoxICAction
Constructs a bicrystal, where one grain is on the inside of the box and the other grain is the outside of the box
Overview
This action creates the initial conditions (ICs) for the two order parameters used to represent a bicrystal. It creates a grain structure with the first grain represented by a rectangle (2D) or rectangular prism (3D) embedded in the second grain. One common use is to create a bicrystal with a single straight grain boundary between the two grains.
The action creates two ICs with the BoundingBoxIC, one for each order parameter. Each are defined with the same bounding box coordinates, but for the first order parameter inside = 1.0
and outside = 0.0
and for the second inside = 0.0
and outside = 1.0
.
Example Input File Syntax
The BicrystalBoundingBoxICAction
is accessed through the ICs/PolycrystalICs
block, as shown below.
[ICs]
[./PolycrystalICs]
[./BicrystalBoundingBoxIC]
x1 = 0
y1 = 0
x2 = 500
y2 = 1000
[../]
[../]
[]
(../moose/modules/phase_field/test/tests/grain_growth/boundingbox.i)Input Parameters
- active__all__ If specified only the blocks named will be visited and made active
Default:__all__
C++ Type:std::vector<std::string>
Controllable:No
Description:If specified only the blocks named will be visited and made active
- blockBlock restriction for the initial condition
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:Block restriction for the initial condition
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- inactiveIf specified blocks matching these identifiers will be skipped.
C++ Type:std::vector<std::string>
Controllable:No
Description:If specified blocks matching these identifiers will be skipped.
- z10The z coordinate of the lower left-hand corner of the box
Default:0
C++ Type:double
Controllable:No
Description:The z coordinate of the lower left-hand corner of the box
- z20The z coordinate of the upper right-hand corner of the box
Default:0
C++ Type:double
Controllable:No
Description:The z coordinate of the upper right-hand corner of the box