- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
- constant_onNONEWhen ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
Default:NONE
C++ Type:MooseEnum
Controllable:No
Description:When ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
- declare_suffixAn optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Controllable:No
Description:An optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- residual_stress0The fraction of the cracking stress allowed to be maintained following a crack.
Default:0
C++ Type:double
Controllable:No
Description:The fraction of the cracking stress allowed to be maintained following a crack.
Abrupt Softening
Softening model with an abrupt stress release upon cracking. This class is intended to be used with ComputeSmearedCrackingStress.
Description
The material AbruptSoftening computes the reduced stress and stiffness in the direction of a crack according to a step function. The computed cracked stiffness ratio softens the tensile response of the material once the principle stress exceeds the cracking stress threshold of the material.
As with the other smeared cracking softening models, which all follow the nomenclature convention of using the Softening suffix, this model is intended to be used with the ComputeSmearedCrackingStress material.
Softening Model
As the class name implies, AbruptSoftening does not allow any gradual softening of the material and instantly drops the stiffness of the material in response to cracking. The tensile stress response to cracking is based on the value of the residual stress retained after softening, , and is given as (1) where the calculated stress, is the principle stress along the direction of the crack, is the stress threshold beyond which cracking occurs, is the Youngs' modulus value, and is the strain in direction of the crack when crack initiation occurred. The ratio of the current stiffness to the original material stiffness is similiarly determined based on the value of the residual stress (2) where is the principle stress along the direction of the crack, is the Youngs' modulus value, and is the maximum strain in the direction of crack. The stiffness ratio is passed back to the ComputeSmearedCrackingStress to compute the softened cracked material stiffness.
Example Input File
[./abrupt_softening]
type = AbruptSoftening
[../]
AbruptSoftening must be run in conjunction with the fixed smeared cracking material model as shown below:
[./elastic_stress]
type = ComputeSmearedCrackingStress
cracking_stress = 1.68e6
softening_models = abrupt_softening
[../]
Input Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- output_propertiesList of material properties, from this material, to output (outputs must also be defined to an output type)
C++ Type:std::vector<std::string>
Controllable:No
Description:List of material properties, from this material, to output (outputs must also be defined to an output type)
- outputsnone Vector of output names where you would like to restrict the output of variables(s) associated with this object
Default:none
C++ Type:std::vector<OutputName>
Controllable:No
Description:Vector of output names where you would like to restrict the output of variables(s) associated with this object