PatternedMeshGenerator

Creates a 2D mesh from a specified set of unique 'tiles' meshes and a two-dimensional pattern.

Overview

The PatternedMeshGenerator object is similar to TiledMeshGenerator. However, it is restricted to two dimensions and adds the ability to create a tile pattern from an arbitrary number of input meshes.

note

The MeshGenerators provided in inputs are no longer required to have the same boundary ids for a given boundary name. In this case, boundary ids for all (cloned) input MeshGenerators are first renamed to a common unused set of ids. Then the resulting stitched patterned mesh will be changed again to boundary ids that are the same as the first entry of the passed inputs parameter.

note

Although best efforts have been made to ensure that the PatternedMeshGenerator fails with a descriptive error message when provided with invalid or ambiguous input, there are some expections that will result in silent failure (the input meshes are stitched together incorrectly and the program continues to run). If this occurs, this issue is likely that one of the left/right/top/bottom_boundary input parameters is set to an incorrect value (i.e., left_boundary = 'right', when the 'right' boundary does not have outward normal (-1, 0, 0)). Check for mistakes like these when troubleshooting errors. Additionally, it should be confirmed that the values of the left/right/top/bottom_boundary parameters are correct for EVERY mesh provided in the 'inputs' parameter (i.e., each mesh in 'inputs' should have the same boundary name, ids may differ, and locations).

For example the input meshes shown in Figures 1 and 2 can be organized into a two dimensional pattern within the input file, as shown below, to create the pattern shown in Figure 3.

[Mesh]
  [./fmg]
    type = FileMeshGenerator
    file = quad_mesh.e
  []

  [./fmg2]
    type = FileMeshGenerator
    file = tri_mesh.e
  []

  [./pmg]
    type = PatternedMeshGenerator
    inputs = 'fmg fmg2'
    pattern = '0 0 0 0 0 0 0 0 0 0 0 0 0 0 ;
               0 1 1 0 0 0 0 0 0 0 0 1 1 0 ;
               0 1 1 1 0 0 0 0 0 0 1 1 1 0 ;
               0 1 0 1 1 0 0 0 0 1 1 0 1 0 ;
               0 1 0 0 1 1 0 0 1 1 0 0 1 0 ;
               0 1 0 0 0 1 1 1 1 0 0 0 1 0 ;
               0 1 0 0 0 0 1 1 0 0 0 0 1 0 ;
               0 1 0 0 0 0 0 0 0 0 0 0 1 0 ;
               0 1 0 0 0 0 0 0 0 0 0 0 1 0 ;
               0 1 0 0 0 0 0 0 0 0 0 0 1 0 ;
               0 1 0 0 0 0 0 0 0 0 0 0 1 0 ;
               0 0 0 0 0 0 0 0 0 0 0 0 0 0'
    bottom_boundary = 1
    right_boundary = 2
    top_boundary = 3
    left_boundary = 4
  []
[]

Fig 1: Input put mesh: quad_mesh.e

Fig 2: Input put mesh: tri_mesh.e

Fig 3: Resulting mesh created using PatternedMesh.

Input Parameters

inputsThe input MeshGenerators.
C++ Type:std::vector<MeshGeneratorName>
Controllable:No
Description:The input MeshGenerators.
patternA double-indexed array starting with the upper-left corner
C++ Type:std::vector<std::vector<unsigned int>>
Controllable:No
Description:A double-indexed array starting with the upper-left corner

Required Parameters

bottom_boundarybottomname of the bottom (y) boundary
Default:bottom
C++ Type:BoundaryName
Controllable:No
Description:name of the bottom (y) boundary
left_boundaryleftname of the left (x) boundary
Default:left
C++ Type:BoundaryName
Controllable:No
Description:name of the left (x) boundary
right_boundaryrightname of the right (x) boundary
Default:right
C++ Type:BoundaryName
Controllable:No
Description:name of the right (x) boundary
top_boundarytopname of the top (y) boundary
Default:top
C++ Type:BoundaryName
Controllable:No
Description:name of the top (y) boundary
x_width0The tile width in the x direction
Default:0
C++ Type:double
Controllable:No
Description:The tile width in the x direction
y_width0The tile width in the y direction
Default:0
C++ Type:double
Controllable:No
Description:The tile width in the y direction
z_width0The tile width in the z direction
Default:0
C++ Type:double
Controllable:No
Description:The tile width in the z direction

Optional Parameters

control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:No
Description:Set the enabled status of the MooseObject.
save_with_nameKeep the mesh from this mesh generator in memory with the name specified
C++ Type:std::string
Controllable:No
Description:Keep the mesh from this mesh generator in memory with the name specified

Advanced Parameters

nemesisFalseWhether or not to output the mesh file in the nemesisformat (only if output = true)
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not to output the mesh file in the nemesisformat (only if output = true)
outputFalseWhether or not to output the mesh file after generating the mesh
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not to output the mesh file after generating the mesh
show_infoFalseWhether or not to show mesh info after generating the mesh (bounding box, element types, sidesets, nodesets, subdomains, etc)
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not to show mesh info after generating the mesh (bounding box, element types, sidesets, nodesets, subdomains, etc)

Debugging Parameters

(../moose/test/tests/meshgenerators/patterned_mesh_generator/patterned_mesh_generator.i)

[Mesh]
  [./fmg]
    type = FileMeshGenerator
    file = quad_mesh.e
  []

  [./fmg2]
    type = FileMeshGenerator
    file = tri_mesh.e
  []

  [./pmg]
    type = PatternedMeshGenerator
    inputs = 'fmg fmg2'
    pattern = '0 0 0 0 0 0 0 0 0 0 0 0 0 0 ;
               0 1 1 0 0 0 0 0 0 0 0 1 1 0 ;
               0 1 1 1 0 0 0 0 0 0 1 1 1 0 ;
               0 1 0 1 1 0 0 0 0 1 1 0 1 0 ;
               0 1 0 0 1 1 0 0 1 1 0 0 1 0 ;
               0 1 0 0 0 1 1 1 1 0 0 0 1 0 ;
               0 1 0 0 0 0 1 1 0 0 0 0 1 0 ;
               0 1 0 0 0 0 0 0 0 0 0 0 1 0 ;
               0 1 0 0 0 0 0 0 0 0 0 0 1 0 ;
               0 1 0 0 0 0 0 0 0 0 0 0 1 0 ;
               0 1 0 0 0 0 0 0 0 0 0 0 1 0 ;
               0 0 0 0 0 0 0 0 0 0 0 0 0 0'
    bottom_boundary = 1
    right_boundary = 2
    top_boundary = 3
    left_boundary = 4
  []
[]

[Variables]
  [./u]
  [../]
[]

[Kernels]
  [./diff]
    type = MatCoefDiffusion
    variable = u
    conductivity = conductivity
  [../]
[]

[BCs]
  [./top]
    type = DirichletBC
    variable = u
    boundary = 3
    value = 1
  [../]
  [./bottom]
    type = DirichletBC
    variable = u
    boundary = 1
    value = 0
  [../]
[]

[Materials]
  [./mat1]
    type = GenericConstantMaterial
    block = 1
    prop_names = conductivity
    prop_values = 100
  [../]
  [./mat2]
    type = GenericConstantMaterial
    block = 2
    prop_names = conductivity
    prop_values = 1e-4
  [../]
[]

[Executioner]
  type = Steady
  solve_type = PJFNK
  petsc_options_iname = '-pc_type -pc_hypre_type'
  petsc_options_value = 'hypre boomeramg'
[]

[Outputs]
  exodus = true
[]