- append_restartFalseAppend existing file on restart
Default:False
C++ Type:bool
Controllable:No
Description:Append existing file on restart
- output_fileFalseOutput to the file
Default:False
C++ Type:bool
Controllable:No
Description:Output to the file
- output_screenTrueOutput to the screen
Default:True
C++ Type:bool
Controllable:No
Description:Output to the screen
- print_mesh_changed_infoFalseWhen true, each time the mesh is changed the mesh information is printed
Default:False
C++ Type:bool
Controllable:No
Description:When true, each time the mesh is changed the mesh information is printed
- use_displacedFalseEnable/disable the use of the displaced mesh for outputting
Default:False
C++ Type:bool
Controllable:No
Description:Enable/disable the use of the displaced mesh for outputting
Console
The Console object in MOOSE is a buffered ostringstream object that should be used to for all screen based output. Each MooseObject derived class has access to the _console member for screen writing. Output to this object can be controlled in various ways from the [Outputs] block. Information can be disabled, output at a lower frequency, colored, or color removed.
Multiapp Output
When using the MOOSE Multiapp system, Output to the _console object will be automatically indented and labeled according to the multiapp level. This can make it easier to identify where output is coming from in a more complex simulation.
Input Parameters
- additional_execute_onThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.
C++ Type:ExecFlagEnum
Controllable:No
Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.
- execute_onINITIAL TIMESTEP_BEGIN LINEAR NONLINEAR FAILEDThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.
Default:INITIAL TIMESTEP_BEGIN LINEAR NONLINEAR FAILED
C++ Type:ExecFlagEnum
Controllable:No
Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.
- output_linearFalseSpecifies whether output occurs on each PETSc linear residual evaluation
Default:False
C++ Type:bool
Controllable:No
Description:Specifies whether output occurs on each PETSc linear residual evaluation
- output_nonlinearFalseSpecifies whether output occurs on each PETSc nonlinear residual evaluation
Default:False
C++ Type:bool
Controllable:No
Description:Specifies whether output occurs on each PETSc nonlinear residual evaluation
Execution Scheduling Parameters
- all_variable_normsFalseIf true, all variable norms will be printed after each solve
Default:False
C++ Type:bool
Controllable:No
Description:If true, all variable norms will be printed after each solve
- outlier_multiplier0.8 2 Multiplier utilized to determine if a residual norm is an outlier. If the variable residual is less than multiplier[0] times the total residual it is colored red. If the variable residual is less than multiplier[1] times the average residual it is colored yellow.
Default:0.8 2
C++ Type:std::vector<double>
Controllable:No
Description:Multiplier utilized to determine if a residual norm is an outlier. If the variable residual is less than multiplier[0] times the total residual it is colored red. If the variable residual is less than multiplier[1] times the average residual it is colored yellow.
- outlier_variable_normsTrueIf true, outlier variable norms will be printed after each solve
Default:True
C++ Type:bool
Controllable:No
Description:If true, outlier variable norms will be printed after each solve
Variable And Residual Norms Parameters
- append_dateFalseWhen true the date and time are appended to the output filename.
Default:False
C++ Type:bool
Controllable:No
Description:When true the date and time are appended to the output filename.
- append_date_formatThe format of the date/time to append, if not given UTC format is used (see http://www.cplusplus.com/reference/ctime/strftime).
C++ Type:std::string
Controllable:No
Description:The format of the date/time to append, if not given UTC format is used (see http://www.cplusplus.com/reference/ctime/strftime).
- file_baseThe desired solution output name without an extension. If not provided, MOOSE sets it with Outputs/file_base when available. Otherwise, MOOSE uses input file name and this object name for a master input or uses master file_base, the subapp name and this object name for a subapp input to set it.
C++ Type:std::string
Controllable:No
Description:The desired solution output name without an extension. If not provided, MOOSE sets it with Outputs/file_base when available. Otherwise, MOOSE uses input file name and this object name for a master input or uses master file_base, the subapp name and this object name for a subapp input to set it.
- output_if_base_containsIf this is supplied then output will only be done in the case that the output base contains one of these strings. This is helpful in outputting only a subset of outputs when using MultiApps.
C++ Type:std::vector<std::string>
Controllable:No
Description:If this is supplied then output will only be done in the case that the output base contains one of these strings. This is helpful in outputting only a subset of outputs when using MultiApps.
- padding4The number of digits for the extension suffix (e.g., out.e-s002)
Default:4
C++ Type:unsigned int
Controllable:No
Description:The number of digits for the extension suffix (e.g., out.e-s002)
File Name Customization Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- show_multiapp_nameFalseIndent multiapp output using the multiapp name
Default:False
C++ Type:bool
Controllable:No
Description:Indent multiapp output using the multiapp name
- system_infoframework mesh aux nonlinear executionList of information types to display ('framework', 'mesh', 'aux', 'nonlinear', 'relationship', 'execution', 'output')
Default:framework mesh aux nonlinear execution
C++ Type:MultiMooseEnum
Controllable:No
Description:List of information types to display ('framework', 'mesh', 'aux', 'nonlinear', 'relationship', 'execution', 'output')
- verboseFalsePrint detailed diagnostics on timestep calculation
Default:False
C++ Type:bool
Controllable:No
Description:Print detailed diagnostics on timestep calculation
Advanced Parameters
- end_stepTime step at which this output object stop operating
C++ Type:int
Controllable:No
Description:Time step at which this output object stop operating
- end_timeTime at which this output object stop operating
C++ Type:double
Controllable:No
Description:Time at which this output object stop operating
- interval1The interval at which time steps are output to the solution file
Default:1
C++ Type:unsigned int
Controllable:No
Description:The interval at which time steps are output to the solution file
- minimum_time_interval0The minimum simulation time between output steps
Default:0
C++ Type:double
Controllable:No
Description:The minimum simulation time between output steps
- start_stepTime step at which this output object begins to operate
C++ Type:int
Controllable:No
Description:Time step at which this output object begins to operate
- start_timeTime at which this output object begins to operate
C++ Type:double
Controllable:No
Description:Time at which this output object begins to operate
- sync_onlyFalseOnly export results at sync times
Default:False
C++ Type:bool
Controllable:No
Description:Only export results at sync times
- sync_timesTimes at which the output and solution is forced to occur
C++ Type:std::vector<double>
Controllable:No
Description:Times at which the output and solution is forced to occur
- sync_times_objectTimes object providing the times at which the output and solution is forced to occur
C++ Type:TimesName
Controllable:No
Description:Times object providing the times at which the output and solution is forced to occur
- time_tolerance1e-14Time tolerance utilized checking start and end times
Default:1e-14
C++ Type:double
Controllable:No
Description:Time tolerance utilized checking start and end times
Timing And Frequency Of Output Parameters
- execute_input_onEnable/disable the output of the input file
C++ Type:ExecFlagEnum
Controllable:No
Description:Enable/disable the output of the input file
- execute_postprocessors_onINITIAL TIMESTEP_ENDControl of when postprocessors are output
Default:INITIAL TIMESTEP_END
C++ Type:ExecFlagEnum
Controllable:No
Description:Control of when postprocessors are output
- execute_reporters_onINITIAL TIMESTEP_ENDControl of when Reporter values are output
Default:INITIAL TIMESTEP_END
C++ Type:ExecFlagEnum
Controllable:No
Description:Control of when Reporter values are output
- execute_scalars_onINITIAL TIMESTEP_ENDControl the output of scalar variables
Default:INITIAL TIMESTEP_END
C++ Type:ExecFlagEnum
Controllable:No
Description:Control the output of scalar variables
- execute_system_information_onINITIALControl when the output of the simulation information occurs
Default:INITIAL
C++ Type:ExecFlagEnum
Controllable:No
Description:Control when the output of the simulation information occurs
- execute_vector_postprocessors_onINITIAL TIMESTEP_ENDEnable/disable the output of VectorPostprocessors
Default:INITIAL TIMESTEP_END
C++ Type:ExecFlagEnum
Controllable:No
Description:Enable/disable the output of VectorPostprocessors
- hideA list of the variables and postprocessors that should NOT be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
C++ Type:std::vector<VariableName>
Controllable:No
Description:A list of the variables and postprocessors that should NOT be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
- showA list of the variables and postprocessors that should be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
C++ Type:std::vector<VariableName>
Controllable:No
Description:A list of the variables and postprocessors that should be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
Selection/Restriction Of Output Parameters
- fit_modeENVIRONMENTSpecifies the wrapping mode for post-processor tables that are printed to the screen (ENVIRONMENT: Read "MOOSE_PPS_WIDTH" for desired width (if not set, defaults to AUTO), AUTO: Attempt to determine width automatically (serial only),
: Desired width Default:ENVIRONMENT
C++ Type:MooseEnum
Controllable:No
Description:Specifies the wrapping mode for post-processor tables that are printed to the screen (ENVIRONMENT: Read "MOOSE_PPS_WIDTH" for desired width (if not set, defaults to AUTO), AUTO: Attempt to determine width automatically (serial only),
: Desired width - max_rows15The maximum number of postprocessor/scalar values displayed on screen during a timestep (set to 0 for unlimited)
Default:15
C++ Type:unsigned int
Controllable:No
Description:The maximum number of postprocessor/scalar values displayed on screen during a timestep (set to 0 for unlimited)
- new_row_tolerance1e-12The independent variable tolerance for determining when a new row should be added to the table (Note: This value must be set independently for Postprocessor output to type=Console and type=CSV file separately.
Default:1e-12
C++ Type:double
Controllable:No
Description:The independent variable tolerance for determining when a new row should be added to the table (Note: This value must be set independently for Postprocessor output to type=Console and type=CSV file separately.
- time_columnTrueWhether or not the 'time' column should be written for Postprocessor CSV files
Default:True
C++ Type:bool
Controllable:No
Description:Whether or not the 'time' column should be written for Postprocessor CSV files
- time_dataFalseWhen true and VectorPostprocessor data exists, write a csv file containing the timestep and time information.
Default:False
C++ Type:bool
Controllable:No
Description:When true and VectorPostprocessor data exists, write a csv file containing the timestep and time information.
Table Formatting Parameters
- libmesh_logTruePrint the libMesh performance log, requires libMesh to be configured with --enable-perflog
Default:True
C++ Type:bool
Controllable:No
Description:Print the libMesh performance log, requires libMesh to be configured with --enable-perflog
- solve_logFalseToggles the printing of the 'Moose Test Performance' log
Default:False
C++ Type:bool
Controllable:No
Description:Toggles the printing of the 'Moose Test Performance' log
Perf Log Parameters
- linear_residual_dt_divisor1000Number of divisions applied to time step when outputting linear residuals
Default:1000
C++ Type:double
Controllable:No
Description:Number of divisions applied to time step when outputting linear residuals
- linear_residual_end_timeSpecifies an end time to begin output on each linear residual evaluation
C++ Type:double
Controllable:No
Description:Specifies an end time to begin output on each linear residual evaluation
- linear_residual_start_timeSpecifies a start time to begin output on each linear residual evaluation
C++ Type:double
Controllable:No
Description:Specifies a start time to begin output on each linear residual evaluation
- nonlinear_residual_dt_divisor1000Number of divisions applied to time step when outputting non-linear residuals
Default:1000
C++ Type:double
Controllable:No
Description:Number of divisions applied to time step when outputting non-linear residuals
- nonlinear_residual_end_timeSpecifies an end time to begin output on each nonlinear residual evaluation
C++ Type:double
Controllable:No
Description:Specifies an end time to begin output on each nonlinear residual evaluation
- nonlinear_residual_start_timeSpecifies a start time to begin output on each nonlinear residual evaluation
C++ Type:double
Controllable:No
Description:Specifies a start time to begin output on each nonlinear residual evaluation
Petsc Linear/Nonlinear Output Parameters
- postprocessors_as_reportersFalseOutput Postprocessors values as Reporter values.
Default:False
C++ Type:bool
Controllable:No
Description:Output Postprocessors values as Reporter values.
- vectorpostprocessors_as_reportersFalseOutput VectorsPostprocessors vectors as Reporter values.
Default:False
C++ Type:bool
Controllable:No
Description:Output VectorsPostprocessors vectors as Reporter values.
Conversions Before Output Parameters
- scientific_timeFalseControl the printing of time and dt in scientific notation
Default:False
C++ Type:bool
Controllable:No
Description:Control the printing of time and dt in scientific notation
- time_formatplainThe format for the printed times ('dtime' means a format like 1d 01:01:0.1)
Default:plain
C++ Type:MooseEnum
Controllable:No
Description:The format for the printed times ('dtime' means a format like 1d 01:01:0.1)
- time_precisionThe number of significant digits that are printed on time related outputs
C++ Type:unsigned int
Controllable:No
Description:The number of significant digits that are printed on time related outputs