- use_displacedFalseEnable/disable the use of the displaced mesh for outputting
Default:False
C++ Type:bool
Controllable:No
Description:Enable/disable the use of the displaced mesh for outputting
SolutionHistory
Outputs the non-linear and linear iteration solve history.
Overview
The SolutionHistory output is a simple output format that writes the nonlinear and linear solve history to a file.
Input Parameters
- additional_execute_onThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.
C++ Type:ExecFlagEnum
Controllable:No
Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.
- execute_onINITIAL TIMESTEP_ENDThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.
Default:INITIAL TIMESTEP_END
C++ Type:ExecFlagEnum
Controllable:No
Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.
- output_linearFalseSpecifies whether output occurs on each PETSc linear residual evaluation
Default:False
C++ Type:bool
Controllable:No
Description:Specifies whether output occurs on each PETSc linear residual evaluation
- output_nonlinearFalseSpecifies whether output occurs on each PETSc nonlinear residual evaluation
Default:False
C++ Type:bool
Controllable:No
Description:Specifies whether output occurs on each PETSc nonlinear residual evaluation
Execution Scheduling Parameters
- append_dateFalseWhen true the date and time are appended to the output filename.
Default:False
C++ Type:bool
Controllable:No
Description:When true the date and time are appended to the output filename.
- append_date_formatThe format of the date/time to append, if not given UTC format is used (see http://www.cplusplus.com/reference/ctime/strftime).
C++ Type:std::string
Controllable:No
Description:The format of the date/time to append, if not given UTC format is used (see http://www.cplusplus.com/reference/ctime/strftime).
- file_baseThe desired solution output name without an extension. If not provided, MOOSE sets it with Outputs/file_base when available. Otherwise, MOOSE uses input file name and this object name for a master input or uses master file_base, the subapp name and this object name for a subapp input to set it.
C++ Type:std::string
Controllable:No
Description:The desired solution output name without an extension. If not provided, MOOSE sets it with Outputs/file_base when available. Otherwise, MOOSE uses input file name and this object name for a master input or uses master file_base, the subapp name and this object name for a subapp input to set it.
- output_if_base_containsIf this is supplied then output will only be done in the case that the output base contains one of these strings. This is helpful in outputting only a subset of outputs when using MultiApps.
C++ Type:std::vector<std::string>
Controllable:No
Description:If this is supplied then output will only be done in the case that the output base contains one of these strings. This is helpful in outputting only a subset of outputs when using MultiApps.
- padding4The number of digits for the extension suffix (e.g., out.e-s002)
Default:4
C++ Type:unsigned int
Controllable:No
Description:The number of digits for the extension suffix (e.g., out.e-s002)
File Name Customization Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
Advanced Parameters
- end_stepTime step at which this output object stop operating
C++ Type:int
Controllable:No
Description:Time step at which this output object stop operating
- end_timeTime at which this output object stop operating
C++ Type:double
Controllable:No
Description:Time at which this output object stop operating
- interval1The interval at which time steps are output to the solution file
Default:1
C++ Type:unsigned int
Controllable:No
Description:The interval at which time steps are output to the solution file
- minimum_time_interval0The minimum simulation time between output steps
Default:0
C++ Type:double
Controllable:No
Description:The minimum simulation time between output steps
- start_stepTime step at which this output object begins to operate
C++ Type:int
Controllable:No
Description:Time step at which this output object begins to operate
- start_timeTime at which this output object begins to operate
C++ Type:double
Controllable:No
Description:Time at which this output object begins to operate
- sync_onlyFalseOnly export results at sync times
Default:False
C++ Type:bool
Controllable:No
Description:Only export results at sync times
- sync_timesTimes at which the output and solution is forced to occur
C++ Type:std::vector<double>
Controllable:No
Description:Times at which the output and solution is forced to occur
- sync_times_objectTimes object providing the times at which the output and solution is forced to occur
C++ Type:TimesName
Controllable:No
Description:Times object providing the times at which the output and solution is forced to occur
- time_tolerance1e-14Time tolerance utilized checking start and end times
Default:1e-14
C++ Type:double
Controllable:No
Description:Time tolerance utilized checking start and end times
Timing And Frequency Of Output Parameters
- linear_residual_dt_divisor1000Number of divisions applied to time step when outputting linear residuals
Default:1000
C++ Type:double
Controllable:No
Description:Number of divisions applied to time step when outputting linear residuals
- linear_residual_end_timeSpecifies an end time to begin output on each linear residual evaluation
C++ Type:double
Controllable:No
Description:Specifies an end time to begin output on each linear residual evaluation
- linear_residual_start_timeSpecifies a start time to begin output on each linear residual evaluation
C++ Type:double
Controllable:No
Description:Specifies a start time to begin output on each linear residual evaluation
- nonlinear_residual_dt_divisor1000Number of divisions applied to time step when outputting non-linear residuals
Default:1000
C++ Type:double
Controllable:No
Description:Number of divisions applied to time step when outputting non-linear residuals
- nonlinear_residual_end_timeSpecifies an end time to begin output on each nonlinear residual evaluation
C++ Type:double
Controllable:No
Description:Specifies an end time to begin output on each nonlinear residual evaluation
- nonlinear_residual_start_timeSpecifies a start time to begin output on each nonlinear residual evaluation
C++ Type:double
Controllable:No
Description:Specifies a start time to begin output on each nonlinear residual evaluation