- use_displacedFalseEnable/disable the use of the displaced mesh for outputting
Default:False
C++ Type:bool
Controllable:No
Description:Enable/disable the use of the displaced mesh for outputting
VTK
Output data using the Visualization Toolkit (VTK).
Overview
The VTK output write variable, postprocessor, and scalar variable information using the Visualization Toolkit format. To use this object libMesh must be configured with the --enable-vtk option.
Input Parameters
- additional_execute_onThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.
C++ Type:ExecFlagEnum
Controllable:No
Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.
- execute_onINITIAL TIMESTEP_ENDThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.
Default:INITIAL TIMESTEP_END
C++ Type:ExecFlagEnum
Controllable:No
Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, FAILED, CUSTOM, ALWAYS.
- output_linearFalseSpecifies whether output occurs on each PETSc linear residual evaluation
Default:False
C++ Type:bool
Controllable:No
Description:Specifies whether output occurs on each PETSc linear residual evaluation
- output_nonlinearFalseSpecifies whether output occurs on each PETSc nonlinear residual evaluation
Default:False
C++ Type:bool
Controllable:No
Description:Specifies whether output occurs on each PETSc nonlinear residual evaluation
Execution Scheduling Parameters
- append_dateFalseWhen true the date and time are appended to the output filename.
Default:False
C++ Type:bool
Controllable:No
Description:When true the date and time are appended to the output filename.
- append_date_formatThe format of the date/time to append, if not given UTC format is used (see http://www.cplusplus.com/reference/ctime/strftime).
C++ Type:std::string
Controllable:No
Description:The format of the date/time to append, if not given UTC format is used (see http://www.cplusplus.com/reference/ctime/strftime).
- file_baseThe desired solution output name without an extension. If not provided, MOOSE sets it with Outputs/file_base when available. Otherwise, MOOSE uses input file name and this object name for a master input or uses master file_base, the subapp name and this object name for a subapp input to set it.
C++ Type:std::string
Controllable:No
Description:The desired solution output name without an extension. If not provided, MOOSE sets it with Outputs/file_base when available. Otherwise, MOOSE uses input file name and this object name for a master input or uses master file_base, the subapp name and this object name for a subapp input to set it.
- output_if_base_containsIf this is supplied then output will only be done in the case that the output base contains one of these strings. This is helpful in outputting only a subset of outputs when using MultiApps.
C++ Type:std::vector<std::string>
Controllable:No
Description:If this is supplied then output will only be done in the case that the output base contains one of these strings. This is helpful in outputting only a subset of outputs when using MultiApps.
- padding3The number of digits for the extension suffix (e.g., out.e-s002)
Default:3
C++ Type:unsigned int
Controllable:No
Description:The number of digits for the extension suffix (e.g., out.e-s002)
File Name Customization Parameters
- binaryFalseSet VTK files to output in binary format
Default:False
C++ Type:bool
Controllable:No
Description:Set VTK files to output in binary format
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
Advanced Parameters
- end_stepTime step at which this output object stop operating
C++ Type:int
Controllable:No
Description:Time step at which this output object stop operating
- end_timeTime at which this output object stop operating
C++ Type:double
Controllable:No
Description:Time at which this output object stop operating
- interval1The interval at which time steps are output to the solution file
Default:1
C++ Type:unsigned int
Controllable:No
Description:The interval at which time steps are output to the solution file
- minimum_time_interval0The minimum simulation time between output steps
Default:0
C++ Type:double
Controllable:No
Description:The minimum simulation time between output steps
- start_stepTime step at which this output object begins to operate
C++ Type:int
Controllable:No
Description:Time step at which this output object begins to operate
- start_timeTime at which this output object begins to operate
C++ Type:double
Controllable:No
Description:Time at which this output object begins to operate
- sync_onlyFalseOnly export results at sync times
Default:False
C++ Type:bool
Controllable:No
Description:Only export results at sync times
- sync_timesTimes at which the output and solution is forced to occur
C++ Type:std::vector<double>
Controllable:No
Description:Times at which the output and solution is forced to occur
- sync_times_objectTimes object providing the times at which the output and solution is forced to occur
C++ Type:TimesName
Controllable:No
Description:Times object providing the times at which the output and solution is forced to occur
- time_tolerance1e-14Time tolerance utilized checking start and end times
Default:1e-14
C++ Type:double
Controllable:No
Description:Time tolerance utilized checking start and end times
Timing And Frequency Of Output Parameters
- fileThe name of the mesh file to read, for oversampling
C++ Type:MeshFileName
Controllable:No
Description:The name of the mesh file to read, for oversampling
- positionSet a positional offset, this vector will get added to the nodal coordinates to move the domain.
C++ Type:libMesh::Point
Controllable:No
Description:Set a positional offset, this vector will get added to the nodal coordinates to move the domain.
- refinements0Number of uniform refinements for oversampling (refinement levels beyond any uniform refinements)
Default:0
C++ Type:unsigned int
Controllable:No
Description:Number of uniform refinements for oversampling (refinement levels beyond any uniform refinements)
Oversampling Parameters
- hideA list of the variables and postprocessors that should NOT be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
C++ Type:std::vector<VariableName>
Controllable:No
Description:A list of the variables and postprocessors that should NOT be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
- showA list of the variables and postprocessors that should be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
C++ Type:std::vector<VariableName>
Controllable:No
Description:A list of the variables and postprocessors that should be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
Selection/Restriction Of Output Parameters
- linear_residual_dt_divisor1000Number of divisions applied to time step when outputting linear residuals
Default:1000
C++ Type:double
Controllable:No
Description:Number of divisions applied to time step when outputting linear residuals
- linear_residual_end_timeSpecifies an end time to begin output on each linear residual evaluation
C++ Type:double
Controllable:No
Description:Specifies an end time to begin output on each linear residual evaluation
- linear_residual_start_timeSpecifies a start time to begin output on each linear residual evaluation
C++ Type:double
Controllable:No
Description:Specifies a start time to begin output on each linear residual evaluation
- nonlinear_residual_dt_divisor1000Number of divisions applied to time step when outputting non-linear residuals
Default:1000
C++ Type:double
Controllable:No
Description:Number of divisions applied to time step when outputting non-linear residuals
- nonlinear_residual_end_timeSpecifies an end time to begin output on each nonlinear residual evaluation
C++ Type:double
Controllable:No
Description:Specifies an end time to begin output on each nonlinear residual evaluation
- nonlinear_residual_start_timeSpecifies a start time to begin output on each nonlinear residual evaluation
C++ Type:double
Controllable:No
Description:Specifies a start time to begin output on each nonlinear residual evaluation
Petsc Linear/Nonlinear Output Parameters
- postprocessors_as_reportersFalseOutput Postprocessors values as Reporter values.
Default:False
C++ Type:bool
Controllable:No
Description:Output Postprocessors values as Reporter values.
- vectorpostprocessors_as_reportersFalseOutput VectorsPostprocessors vectors as Reporter values.
Default:False
C++ Type:bool
Controllable:No
Description:Output VectorsPostprocessors vectors as Reporter values.